Pilot

Remote control plugin for OpenCode and Codex CLI — monitor sessions, send prompts, approve permissions, switch agents, and get notifications from your phone or any browser.

---

What it does

Spin up OpenCode locally, get a web dashboard you can open on your laptop or phone. From the dashboard you can:

• See all your sessions across all your projects (multi-project tabs)
• Send prompts and watch responses stream live
• Approve / deny tool permissions remotely
• Switch agents (build / plan / general / explore) per session
• Track cost per session, per day, per week
• Get sound, browser, push, and Telegram notifications when an agent finishes
• Pin TODOs that survive across sessions
• Diff view of all files changed
• File browser with live filter
• Connect from your phone via QR code (LAN or public tunnel)
• Monitor Codex CLI sessions too via the /codex/hooks/:event HTTP bridge — same dashboard, same notifications, same permission flow (see docs/CODEX-INTEGRATION.md)

All from one keyboard shortcut (? opens the command palette).

---

Install once, use everywhere

opencode-pilot installs globally into your OpenCode config dir (~/.config/opencode on Linux/macOS, %APPDATA%\opencode on Windows). One install and the plugin auto-loads every time you run opencode from any project directory — no per-project setup, no .opencode/ folders to copy around, no duplicate configs.

That's the whole point of running the installer: drop it in once, then just use opencode normally and the dashboard is always there.

Quick Start

One command (recommended)

npx @lesquel/opencode-pilot init
# or
bunx @lesquel/opencode-pilot init

That's it. The installer:

1. Locates your OpenCode config dir (~/.config/opencode or your XDG path / %APPDATA%).
2. Installs the plugin there (@lesquel/opencode-pilot@latest + @opencode-ai/plugin@latest).
3. Adds "@lesquel/opencode-pilot@latest" to both opencode.json::plugin (for the dashboard server) and tui.json::plugin (for the slash commands). OpenCode uses two separate plugin loaders — one file each.
4. Cleans up stale wrappers, cache entries, and legacy subpath specs left by earlier (<=1.12.x) installs.

Fully close any running OpenCode sessions and reopen. A toast should appear:

OpenCode Pilot — Remote control plugin loaded. Use /pilot or /pilot-token.

The banner also prints in the terminal with URL + token + QR. If the toast doesn't appear, see Troubleshooting.

Configuration is done from the dashboard (gear icon → Plugin configuration). You do NOT need to create a .env — though you still can if you prefer.

Manual install (if you want to)

# 1. Install in your OpenCode config dir
cd ~/.config/opencode    # or your XDG_CONFIG_HOME path
bun add @lesquel/opencode-pilot@latest @opencode-ai/plugin@latest

# 2. Add the spec to BOTH config files:
#
#    opencode.json  — registers the dashboard server plugin:
#    {
#      "plugin": ["@lesquel/opencode-pilot@latest"]
#    }
#
#    tui.json  — registers the slash commands (create this file if missing):
#    {
#      "$schema": "https://opencode.ai/tui.json",
#      "plugin": ["@lesquel/opencode-pilot@latest"]
#    }

OpenCode runs two separate plugin loaders: the server loader reads opencode.json::plugin (for server() exports like the dashboard), and the TUI loader reads tui.json::plugin (for tui() exports like slash commands). A spec in only one of them gets you half the plugin. Do not add wrappers in <config>/plugins/ — they conflict with the server loader's strict validation.

Run opencode from any project directory. Banner prints with URL + token + QR.

---

Going deeper? docs/INSTALL.md explains OpenCode's two-loader plugin architecture, documents every gotcha we hit, and has a complete troubleshooting matrix. Read it if you're debugging, contributing, or publishing your own OpenCode plugin.

How to use it day-to-day

Once installed and OpenCode restarted, you have four entry points:

1. Slash commands from inside OpenCode TUI

Type any of these at the prompt:

Command	What it does
/pilot	Show the current dashboard URL + token
/pilot-token	Rotate the auth token (invalidates any open dashboards/phones)
/dashboard	Same as /pilot — alias
/remote	Print connection info (host, port, tunnel URL if active)
/remote-control	Full status block with all the above plus QR hint

2. Terminal banner at startup

Every opencode launch prints a banner with the dashboard URL, a token, and a QR code. Open the URL in any browser on the same machine, or scan the QR with your phone (requires PILOT_HOST=0.0.0.0 for LAN — see below).

3. The web dashboard itself

Open the URL. Then:

• ? opens the command palette — every action is reachable from there.
• Left sidebar: sessions grouped by folder. Click one to switch. + creates a new session.
• Center pane: the live transcript — user messages appear instantly, the assistant's response streams token by token, tool calls animate pending → running → completed with their inputs and outputs expandable inline.
• Right panel: context usage, MCP servers, LSP status, project path, pinned TODOs.
• Tabs at the top: open multiple projects in parallel (v1.11+).
• Gear icon (⚙): Settings UI — change port/host, enable tunnel, wire up Telegram bot, generate VAPID keys for Web Push. Everything is editable from here; you rarely need to touch .env files anymore.

4. From your phone

See Connect from your phone below. Either same-WiFi (LAN) with PILOT_HOST=0.0.0.0, or anywhere with a Cloudflare / ngrok tunnel. The dashboard is mobile-friendly — bottom-sheet modals, 44px tap targets, swipe-to-close. Permissions approvals, prompt sending, session switching all work from the phone.

Troubleshooting — slash commands don't appear

Other symptoms (port conflicts, /remote says "server not running", dashboard 401s, push/telegram silent, wrong tab opens) are covered in docs/TROUBLESHOOTING.md. This section is specifically about the "I installed it but slash commands are missing" case.

If the plugin loads (you see the banner in the terminal) but typing /remo<Tab> in the TUI doesn't autocomplete /remote, /dashboard, /pilot, /pilot-token, or /remote-control:

1. Check the canary toast. On startup the TUI should toast "OpenCode Pilot — Remote control plugin loaded". No toast → the TUI plugin didn't register, even if the dashboard server did.

2. Inspect the latest log:

   tail -200 $(ls -t ~/.local/share/opencode/log/*.log | head -1) | grep -iE "pilot|tui.plugin|error"
   

   • Windows: %LOCALAPPDATA%\opencode\log\<timestamp>.log
   • macOS: ~/Library/Logs/opencode/<timestamp>.log

3. Re-run init. It cleans up stale wrappers and stale subpath entries left behind by 1.11.x–1.12.x:

   npx @lesquel/opencode-pilot@latest init
   

   Then fully close all OpenCode sessions (the plugin loader is cached per running process) and reopen.

4. Verify BOTH opencode.json::plugin AND tui.json::plugin each have exactly one entry for the pilot:

   "plugin": ["@lesquel/opencode-pilot@latest"]
   

   If tui.json is missing entirely, the TUI plugin was never registered and slash commands never appear — init in 1.13.1+ creates this file. If you see "@lesquel/opencode-pilot/tui" anywhere or wrapper paths in the array, the old install pattern got in — npx init in step 3 fixes that.

5. Verify no stale wrappers in ~/.config/opencode/plugins/. Safe to delete: opencode-pilot.ts, opencode-pilot-tui.ts. These were auto-generated by 1.11.x–1.12.x and are no longer needed. init does this cleanup automatically.

---

Connect from your phone

Same WiFi (LAN access)

1. Set PILOT_HOST=0.0.0.0 in .env
2. Restart OpenCode
3. Click the phone icon in the dashboard header (c shortcut)
4. Scan the QR from the "Local network" tab with your phone camera
5. Done — same dashboard, on your phone

Anywhere (public tunnel)

1. Install cloudflared (brew install cloudflared on Mac)
2. Add PILOT_TUNNEL=cloudflared to your .env
3. Restart OpenCode — it spawns the tunnel automatically
4. Phone modal "Public tunnel" tab now has a QR with a public HTTPS URL
5. Works from cellular, hotel WiFi, anywhere

🔐 Security note: the tunnel URL contains your token. Treat it like a password. See docs/TUNNEL_TESTING.md for security checklist.

---

Features

Dashboard

• Sessions sidebar with folder grouping and agent filter
• Multi-view to watch multiple sessions side-by-side (desktop only)
• Project tabs at the top — open multiple projects in parallel
• Right info panel with Context, MCP servers, LSP clients, project path, instance version
• Pinned TODOs survive across sessions and project switches
• Cost panel with per-session, daily, and weekly totals + budget alerts
• Diff tab showing all files changed in current session

Notifications

Type	Trigger	Setup
Sound	Page hidden + assistant turn complete	Toggle in Settings
Browser notification	Page hidden + permission granted	Toggle, allow when prompted
Push (Web Push)	Anywhere, even browser closed	VAPID keys in .env (guide)
Telegram	Permission requests + completions	Bot token in .env

Mobile-friendly

• Drawer sidebar with backdrop
• Full-screen modals
• Multi-view auto-hidden (use desktop for split view)
• Right panel as bottom toggle
• Live filter on file browser
• 44×44 touch targets everywhere

Keyboard shortcuts

Single-key (when no input focused):

Key	Action
?	Open command palette + show shortcuts
n	New session
s	Toggle sidebar
m	Toggle multi-view (desktop only)
t	Toggle theme
c	Connect from phone modal
/	Focus prompt input
Esc	Close modal/picker/palette

Modifier:

Key	Action
Cmd/Ctrl+K	Command palette
Cmd/Ctrl+Enter	Send prompt
Alt+I	Toggle right info panel

---

Configuration — two ways

Since v1.12 you can configure the plugin two ways (or both):

Easy: the Settings UI

1. Open the dashboard
2. Click the gear icon (⚙) in the header
3. Go to Plugin configuration
4. Edit port, host, tunnel, Telegram token, VAPID keys, permission timeout, and the glob opener toggle
5. Click Save — values are written to ~/.opencode-pilot/config.json and survive restarts

Some fields (port, host, tunnel, VAPID keys) require an OpenCode restart to take effect — the UI shows an inline warning for those. A Generate VAPID keys button calls the server to create a key pair in one click.

Each field shows a small badge telling you where its current value comes from: saved (UI), .env, shell, or default. Fields set via shell env vars are locked from the UI — you must unset the shell var to override.

Power user: .env file

Full env-var reference with example .env files for common scenarios lives in docs/CONFIGURATION.md. Quick overview:

Variable	Default	What
PILOT_PORT	4097	HTTP server port
PILOT_HOST	127.0.0.1	Bind address (0.0.0.0 for LAN)
PILOT_TUNNEL	(off)	cloudflared or ngrok for public access
PILOT_PERMISSION_TIMEOUT	300000	Permission-request timeout in ms
PILOT_TELEGRAM_TOKEN	(off)	Telegram bot token from @BotFather
PILOT_TELEGRAM_CHAT_ID	(off)	Your Telegram chat ID
PILOT_VAPID_PUBLIC_KEY	(off)	Web Push public key (bunx web-push generate-vapid-keys)
PILOT_VAPID_PRIVATE_KEY	(off)	Web Push private key
PILOT_ENABLE_GLOB_OPENER	false	Enable /fs/glob for the dashboard's glob search
PILOT_FETCH_TIMEOUT_MS	10000	Timeout for outbound HTTP calls (Telegram, push)

Priority (highest wins)

1. Shell env vars                         e.g. PILOT_PORT=5000 opencode
2. ~/.opencode-pilot/config.json          written by the Settings UI
3. .env file (process.cwd or plugin dir)  power-user file-based config
4. Hardcoded defaults                     fallback

The .env file is searched in: (1) process.cwd()/.env then (2) the plugin's install dir. Shell env vars always win over both .env and the Settings UI.

---

Documentation

For users

• Troubleshooting runtime issues — start here if /remote says "server not running", the dashboard 401s, push/telegram isn't arriving, or the wrong tab opens
• Install deep-dive — how OpenCode's two-loader plugin architecture works, every trap we've hit getting a clean install, full troubleshooting matrix
• Configuration reference — every env var, with example .env files for common scenarios
• Connect from phone — LAN + tunnel setup
• Tunnel testing — end-to-end verification guide

For contributors and AI agents

• AGENTS.md — strict workflow for AI agents and humans editing the repo (hard rules, release process, debugging playbook, Engram protocol)
• CLAUDE.md — codebase overview, file map, routes, event types
• Architecture — design decisions with rationale
• Release checklist — step-by-step execution guide for shipping a new version
• Publishing to npm — one-time npm account setup and scope choice
• Cloud relay v2.0 design — architecture doc for a future centralized service
• Production readiness — deployment-mode verdicts

---

Architecture (one line)

The plugin runs ONE HTTP+SSE server inside your OpenCode process. The dashboard is a vanilla ES-modules SPA served from the same origin. All API calls go through the SDK with ?directory= for multi-project routing.

If you want the deep version, see the docs/ folder.

---

Tech stack

• Server: Bun + TypeScript (strict)
• Dashboard: vanilla ES modules, plain CSS, ~9000 LOC. No React, no build step.
• Optional deps: cloudflared / ngrok (tunnel), @modelcontextprotocol/sdk (MCP), web-push (push notifications)
• Tests: 228 (Bun test runner), all green

---

Contributing

Issues are welcome. Pull requests are welcome only after maintainer approval.

Please start with an issue first: bug report, feature request, or discussion. The maintainer will triage it and either:

• fix it directly and comment on the issue,
• ask you to send a PR, or
• close it as out of scope / duplicate / needs more information.

Read CONTRIBUTING.md for the full issue-first workflow, PR rules, review expectations, contributor credit, and local development setup.

Maintainer notes for contributors:

• One PR per approved issue.
• Keep PRs small and reviewable.
• Add tests for behavior changes.
• Do not bump versions, edit CHANGELOG.md, or publish releases.
• Follow AGENTS.md for codebase conventions: no any, no server console.log, factory functions, release safety rules.

Security reports are private: see SECURITY.md. Community expectations are in CODE_OF_CONDUCT.md.

Shipping a new version is maintainer-only: follow docs/RELEASE.md. Pushing a vX.Y.Z tag is the only supported way to publish.

---

License

MIT © lesquel